Oil Mist Filter for Vacuum Pumps

Franke-Filter oil mist filter for vacuum pumps are designed to filter the exhaust from oil sealed vacuum pumps, which is saturated with fine oil particles. 
With a filtration efficiency of more than 99.9% at 0.1 micron, our oil mist filter for vacuum pumps have a residual oil mist content of less than 5mg/m³ in the clean air.
 
Franke-Filter for vacuum pumps can be used for volume flows from 5 m³/h up to 2000 m³/h. 
 

Efficiency of Oil Mist Filter for Vacuum Pumps

Watch our video where we proof the efficiency of our oil mist filters.

Advantages of Oil Mist Filters for Vacuum Pumps

  1. Residual oil mist content of less than 5 mg/m³
  2. Recycling of lube oil
  3. Complies with governmental regulations like the German "TA-Luft"
  4. Prohibits oil mist to be mixed with other gases
  5. No pollution with oil mist
  6. Low back pressure
  7. Low running cost

Oil Mist Filter for Vacuum Pumps

Oil Mist Filter for Vacuum Pumps with Screw Thread

Volume flow: 5 m³/h to 765 m³/h Material: CS or SS Pressure gauges: standard 400mbar or customized Connections: 3/4" to 3" G/NPT Oil return: 1/8" to 1/2" G/NPT

Oil Mist Filter for Vacuum Pumps with Flanges

Volume Flow: 100 m³/h to 2000 m³/h. Material: CS or SS Pressure Gauge: standard 400mbar or customised Connection: Flanges DN 80/3" to DN 150/6" according EN1092-1 / ASME  Oil Return: 1/2" G/NPT