Clean oil in the lubricating oil system

Lubrication oil is filtered from the aspirated crude air by a mechanical process called the coalescence effect and then led back into the lube oil tank. This is an economical and environmentally-friendly process. Lubrication oil which is selected optimally for a certain type of turbine due to its additives has to constantly remain of a high quality and fulfil these certain criteria e.g.:

  • Corrosion protection
  • Aging protection
  • Foaming reduction
  • Certain viscosity index
  • Wear and friction reduction

What would happen if the lubrication oil`s composition would be changed and the necessary additives would get lost in the filtration process? All your investments would have been for nothing.

To avoid the situation described above we recommend our FRANKE-Filter oil mist separator. Independent tests from our customers who have controlled the composition of oil after several thousand operating hours, ascertain the constantly remaining high quality of lube oil. FRANKE-Filter Oil Mist Separators ensure the retaining of additives, viscosity and high efficiency. The absorbed contaminants, on the other hand, get caught in micro fibres. It is a sort of rejuvenating cure for the lubrication oil and the turbine.

Your advantages if you install an Oil Mist Separator

  • 30,000 hours and more of failure-free operation
  • Quality of the lubrication oil remains constantly high
  • Filter efficiency of 99.99% at 0.1 microns
  • Saves up to 2,000 litres lubrication oil and even more
  • < 1mg / m³ residual oil possible
  • Complies with the german “TA-Luft” regulations 

If you have any more questions please don't hesitate to write us an email:  info@franke-filter.de 

We would be happy to hear from you.